Details of machining, forging and casting
2024-04
In the process of using detailed mechanical processing, its mechanical properties are better than cast iron, but the cast iron properties of this material is poor, the melting point is higher than other materials. Its in the process of processing need to pay attention to the problem is quite a lot, mainly because of the liquidity of the steel is relatively poor, in the process of processing, we are in order to prevent the meticulous mechanical processing to produce insufficient pouring or cold segregation, meticulous mechanical processing of the wall thickness is not less than 8mm. The structure of the casting system is relatively simple, in the process of using its equipment in the cross-section size if the cast iron is large, so that in the process of processing can also be used in its hot casting or dry casting.
Temperature to determine the melt in the process of reinjection of good mobility, the choice of detailed mechanical processing temperature should be based on the distance of reinjection, reinjection of the process of cooling conditions, alloy, specifications, flow and other factors to determine the detailed mechanical processing temperature than the alloy liquid-phase line temperature is higher than the temperature of the liquid-phase line of 50 to 110 ℃. Production temperature can determine its melt in the process of reinjection will have good fluidity, equipment in the process of selecting its casting temperature needs to be based on its reinjection distance and reinjection process cooling conditions and other factors to determine.
2024-04-30
Machining installation sequence and process
Installation of detailed machining sequences to be aware of：Arrangement of detailed machining sequence, need to follow "First face after the hole", "First rough after fine" the basic principles.
2024-04-30
Machining technology heat treatment process
With the development of aerospace, industry, microelectronics industry, modern and bioengineering technology, the demand for / detailed mechanical parts (feature size in the micron to millimeter level) is increasingly urgent.
2024-04-30
Details of machining, forging and casting
In the process of using detailed mechanical processing
2024-04-30
Machined surfaces and solidification knowledge
there will be many gray-black circular shallow pits on the surface of the meticulous machining