What are the factors that affect high product parts?
2024-04
machining has been used in many ways, because the current mechanical manufacturing requirements for output have decreased, the requirements for size and shape have gradually increased, and there is a new development trend for high-quality parts. The use of lathes requires different turning methods, but processes such as grinding, gear cutting, and milling can be carried out in a single lathe, and the trend of integration of this process is obvious.
In the process of tempering high-quality product parts, the stress generated during quenching can be to a certain extent, the decomposition and transformation of martensite and residual austenite metastable structure after quenching, and the temperature of product tempering is usually below the eutectic transition temperature, which is about 650 °C, and the holding time is not less than 2h. The
production temperature of high product parts can be determined to the extent that the melt will have good fluidity in the process of transfer, and the equipment needs to be determined according to some factors such as the distance of its transfer and the cooling in the process of transfer.
When the geometric parameters of the tool are processed in the operation of the high-product parts, the geometry of the cutting part of the product tool should generally be considered from the selection of the rake angle and the rear angle, and the requirements of the surface roughness of the cutting part of the high-product parts can reduce the resistance of the chip when the chip is curled, and the degree of the tool can be improved.
PREVIOUS:
2026-03-23
On March 19, 2026, the domestic industry’s first large-scale IMC (In-Mold Coating) automotive exterior component successfully rolled off the production line in Jiaxing, China. As a key partner and precision mold supplier, Wanlong Mould was deeply involved in the R&D of this milestone project for Li Auto. The Wanlong team successfully overcame deformation control challenges for the 1.4m x 1.2m extra-large mold and pioneered an "all-scenario" sealing solution. By maintaining PUR coating thickness tolerances within ±0.1mm, Wanlong helped Li Auto achieve a critical "0-to-1" breakthrough in green manufacturing for exterior parts.
2026-03-23
On January 26, 2026, Zhejiang Wanlong Mold participated in the strategic launch of the IMC (In-Mold Coating) project led by Geely Automobile, SABIC, and Minth Group. As a key mold supplier, Wanlong Mold is instrumental in overcoming technical challenges for large exterior parts, focusing on high-precision tooling and eco-friendly manufacturing.
2024-04-30
Machining installation sequence and process
Installation of detailed machining sequences to be aware of：Arrangement of detailed machining sequence, need to follow "First face after the hole", "First rough after fine" the basic principles.
2024-04-30
Machining technology heat treatment process
With the development of aerospace, industry, microelectronics industry, modern and bioengineering technology, the demand for / detailed mechanical parts (feature size in the micron to millimeter level) is increasingly urgent.